Example-OSPF

From VNUML-WIKI
Revision as of 13:58, 25 February 2007 by David (talk | contribs) (New page: {{Title|OSPF Networking Laboratory}} <big> Authors: '''Fermín Galán (galan at dit.upm.es)''' '''David Fernández (david at dit.upm.es)''' '''version 1.7, November 23rd, 2006''...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

OSPF Networking Laboratory

Authors:
Fermín Galán (galan at dit.upm.es)
David Fernández (david at dit.upm.es)
version 1.7, November 23rd, 2006


Scenario

This example shows the VNUML implementation of a networking laboratory for OSPF dymanic routing protocol tests. It is a virtual implementation of the real-based network laboratory testbed of the Telematic Networks and Services Laboratory (in Spanish) last exercise at DIT-UPM grade course. This environment was used at ITHET'04 in order to illustrate VNUML application for high educational purposes.The laboratory tries to resemble to the network of a distributed organization. The core of the network is a backbone (routers RB1, RB2, RB3 and RB4) that interconnects several regional headquarters (from A to F) to the central organization headquarters. Each regional headquarters provides connectivity for two sites (from 1 to 12).
[ospf_lab.png OSPF Lab]
The network layout is shown in the picture. Click to enlarge.
  • Each site is composed of a computer (PCx) and an outbound router. The computer is configured with a default route to the outbound router.
  • Each regional headquarters is composed of a server (SRx), an inbound router (RRx2) and an outbound router (RRx1). The server is configured with a default route to the outbound router.
  • The central headquarters of several internals routers (RC1, RC2, RC3 and RC4) and a server (SC). All them are configured with default routes to the backbone. All the routers in the simulation (except for the ones in the central headquarters) run ospfd, a daemon process from the Zebra Suite that implements OSPF protocol. This protocol allows each router to configure dynamic routes so, after a convergence time, global connectivity is achive once the simulation has been started. You'll need to download the [ospf_lab_conf.tar.gz configuration for ospfd daemons] and unpacked it in the examples directory:
cd /usr/share/vnuml/examples
tar xfvz ospf_lab_conf.tar.gz

Note that this is a very big VNUML simulation, involving 51 virtual machines and 45 virtual networks. So, be aware that the hosting machine could get stressed (or even worse!). You can use the -w switch to increase the boot timeout (see User Manual for details). For example:

vnumlparser.pl -t ospf_lab.xml -v -w 120

(However, if your simulation is too big for your host, try to use a tiner version of the VNUML specification. For example, try to remove some of the regional headquarters and/or sites. There is a [ospf_lab_tiny.xml tiny version of ospf_lab.xml] with regional headquarters C, D and E; sites 2, 3 and 11; and servers SRA, RFB and SRF commented out in the XML)Some examples of test performed with this virtual scenario:

  • Connectivity from PC01 to PC12:
PC01:~# traceroute -n 195.1.95.66
traceroute to 195.1.95.66 (195.1.95.66), 30 hops max, 38 byte packets
1  195.1.85.1  0.647 ms  0.614 ms  0.526 ms
2  195.1.95.193  0.976 ms  140.597 ms  0.814 ms
3  195.1.84.1  15.086 ms  1.097 ms  1.182 ms
4  195.1.95.161  1.404 ms  1.299 ms  1.322 ms
5  195.1.95.129  5.458 ms  2.132 ms  2.156 ms
6  195.1.95.138  11.272 ms  2.355 ms  2.301 ms
7  195.1.95.182  2.874 ms  2.798 ms  68.750 ms
8  195.1.94.2  3.377 ms  2.919 ms  3.116 ms
9  195.1.95.238  3.328 ms  3.189 ms  4.028 ms
10  195.1.95.66  4.896 ms  3.875 ms  4.395 ms
  • Connectivity from PC01 to PC04:
PC01:~# traceroute -n 195.1.87.66
traceroute to 195.1.87.66 (195.1.87.66), 30 hops max, 38 byte packets
1  195.1.85.1  1.127 ms  0.461 ms  0.494 ms
2  195.1.95.193  0.906 ms  0.701 ms  0.983 ms
3  195.1.84.1  1.230 ms  1.569 ms  1.249 ms
4  195.1.95.161  1.347 ms  1.309 ms  1.287 ms
5  195.1.95.166  2.131 ms  1.970 ms  1.753 ms
6  195.1.86.2  2.286 ms  2.622 ms  2.124 ms
7  195.1.95.206  2.449 ms  2.200 ms  2.647 ms
8  195.1.87.66  3.022 ms  2.741 ms  3.103 ms
  • Connectivity from PC01 to SC:
PC01:~# traceroute -n 10.0.11.22
traceroute to 10.0.11.22 (10.0.11.22), 30 hops max, 38 byte packets
1  195.1.85.1  0.599 ms  0.613 ms  0.503 ms
2  195.1.95.193  0.842 ms  0.790 ms  0.978 ms
3  195.1.84.1  1.291 ms  1.443 ms  1.084 ms
4  195.1.95.161  1.447 ms  1.318 ms  29.843 ms
5  195.1.95.129  2.391 ms  2.183 ms  1.761 ms
6  10.0.11.22  2.067 ms  2.153 ms  2.124 ms
  • OSPF information from ospfd at RB1: RB1> show ip ospf route ============ OSPF network routing table ============ N 10.0.11.0/24 [10] area: (0.0.0.0) directly attached to eth3 N 195.1.84.0/26 [30] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.85.0/26 [50] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.85.64/26 [50] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.86.0/26 [30] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.87.0/26 [50] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.87.64/26 [50] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.88.0/26 [40] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.89.0/26 [60] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.89.64/26 [60] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.90.0/26 [40] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.91.0/26 [60] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.91.64/26 [60] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.92.0/26 [30] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.93.0/26 [50] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.93.64/26 [50] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.94.0/26 [30] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.95.0/26 [50] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.95.64/26 [50] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.95.128/30 [10] area: (0.0.0.0) directly attached to eth1 N 195.1.95.132/30 [20] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.95.136/30 [20] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.95.140/30 [10] area: (0.0.0.0) directly attached to eth2 N 195.1.95.160/30 [20] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.130, eth1 N 195.1.95.164/30 [20] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.95.168/30 [30] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.95.172/30 [30] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.95.176/30 [20] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.95.180/30 [20] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.95.192/30 [40] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.95.196/30 [40] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.95.200/30 [40] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.95.204/30 [40] area: (0.0.0.0) via 195.1.95.130, eth1 N 195.1.95.208/30 [50] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.95.212/30 [50] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.95.216/30 [50] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.95.220/30 [50] area: (0.0.0.0) via 195.1.95.130, eth1 via 195.1.95.142, eth2 N 195.1.95.224/30 [40] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.95.228/30 [40] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.95.232/30 [40] area: (0.0.0.0) via 195.1.95.142, eth2 N 195.1.95.236/30 [40] area: (0.0.0.0) via 195.1.95.142, eth2 ============ OSPF external routing table =========== RB1> show ip ospf neighbor Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL 195.1.95.165 1 Full/DR 00:00:37 195.1.95.130 eth1:195.1.95.129 0 0 0 195.1.95.181 1 Full/DR 00:00:33 195.1.95.142 eth2:195.1.95.141 0 0 0 RB1> show ip ospf interface ... eth1 is up, line protocol is up Internet Address 195.1.95.129/30, Area (0.0.0.0) Router ID 195.1.95.141, Network Type BROADCAST, Cost: 10 Transmit Delay is 1 sec, State Backup, Priority 1 Designated Router (ID) 195.1.95.165, Interface Address 195.1.95.130 Backup Designated Router (ID) 195.1.95.141, Interface Address 195.1.95.129 Timer intarvals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Hello due in 00:00:09 Neighbor Count is 1, Adjacent neighbor count is 1 eth2 is up, line protocol is up Internet Address 195.1.95.141/30, Area (0.0.0.0) Router ID 195.1.95.141, Network Type BROADCAST, Cost: 10 Transmit Delay is 1 sec, State Backup, Priority 1 Designated Router (ID) 195.1.95.181, Interface Address 195.1.95.142 Backup Designated Router (ID) 195.1.95.141, Interface Address 195.1.95.141 Timer intarvals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Hello due in 00:00:09 Neighbor Count is 1, Adjacent neighbor count is 1 eth3 is up, line protocol is up Internet Address 10.0.11.50/24, Area (0.0.0.0) Router ID 195.1.95.141, Network Type BROADCAST, Cost: 10 Transmit Delay is 1 sec, State DR, Priority 1 Designated Router (ID) 195.1.95.141, Interface Address 10.0.11.50 No backup designated router on this network Timer intarvals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Hello due in 00:00:06 Neighbor Count is 0, Adjacent neighbor count is 0 ... You can download the simulation file from [ospf_lab.xml here].The example could be improved in several ways. For example:
  • The simulation is too big and this has a significative impact when building topology. A solution could be to split the simulation in several pieces, and building only desired parts for each testing case. Read more about this in the [../../user/index.html#concurrent_simulations VNUML User Manual].
  • The provided configuration for ospfd daemons is quite simple: all the routers uses OSPF in all their directly connected networks and a single area is use. A multiarea configuration could be more desirable. In addition, some networks (specially PPP-like links between some routers) shouldn't be globally advertised.


VNUML Description

</pre>

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE vnuml SYSTEM "/usr/share/xml/vnuml/vnuml.dtd">

<vnuml>
   <global>
      <version>1.7</version>
      <simulation_name>ospf_lab</simulation_name>
      <ssh_version>1</ssh_version>
      <ssh_key>~/.ssh/identity.pub</ssh_key>
      <automac offset="0"/>
      <vm_mgmt type="net" network="10.250.0.0" mask="24" offset="0">
         <mgmt_net sock="/var/run/vnuml/Mgmt_net.ctl" hostip="10.250.0.1"/>
      </vm_mgmt>
      <vm_defaults>
         <filesystem type="cow">/usr/share/vnuml/filesystems/root_fs_tutorial</filesystem>
         <kernel>/usr/share/vnuml/kernels/linux</kernel>
         <console id="0">pts</console>
      </vm_defaults>
   </global>
   
   <net name="Core1" mode="uml_switch" /> 
   <net name="Core2" mode="uml_switch" /> 
   <net name="Core3" mode="uml_switch" /> 
   <net name="Core4" mode="uml_switch" /> 
   
   <net name="boneA" mode="uml_switch" /> 
   <net name="boneB" mode="uml_switch" /> 
   <net name="boneC" mode="uml_switch" /> 
   <net name="boneD" mode="uml_switch" /> 
   <net name="boneE" mode="uml_switch" /> 
   <net name="boneF" mode="uml_switch" /> 
  
   <net name="sedeA" mode="uml_switch" /> 
   <net name="linkA01" mode="uml_switch" /> 
   <net name="linkA02" mode="uml_switch" /> 
   <net name="suc01" mode="uml_switch" /> 
   <net name="suc02" mode="uml_switch" /> 
  
   <net name="sedeB" mode="uml_switch" /> 
   <net name="linkB03" mode="uml_switch" /> 
   <net name="linkB04" mode="uml_switch" /> 
   <net name="suc03" mode="uml_switch" /> 
   <net name="suc04" mode="uml_switch" /> 
 
   <net name="sedeC" mode="uml_switch" /> 
   <net name="linkC05" mode="uml_switch" /> 
   <net name="linkC06" mode="uml_switch" /> 
   <net name="suc05" mode="uml_switch" /> 
   <net name="suc06" mode="uml_switch" /> 
 
   <net name="sedeD" mode="uml_switch" /> 
   <net name="linkD07" mode="uml_switch" /> 
   <net name="linkD08" mode="uml_switch" /> 
   <net name="suc07" mode="uml_switch" /> 
   <net name="suc08" mode="uml_switch" /> 
 
   <net name="sedeE" mode="uml_switch" /> 
   <net name="linkE09" mode="uml_switch" /> 
   <net name="linkE10" mode="uml_switch" /> 
   <net name="suc09" mode="uml_switch" /> 
   <net name="suc10" mode="uml_switch" /> 
 
   <net name="sedeF" mode="uml_switch" /> 
   <net name="linkF11" mode="uml_switch" /> 
   <net name="linkF12" mode="uml_switch" /> 
   <net name="suc11" mode="uml_switch" /> 
   <net name="suc12" mode="uml_switch" /> 
 
   <net name="centraC" mode="uml_switch" /> 
   <net name="centra1" mode="uml_switch" /> 
   <net name="centra2" mode="uml_switch" /> 
   <net name="centra3" mode="uml_switch" /> 
   <net name="centra4" mode="uml_switch" /> 

   <vm name="RB1">      
      <if id="1" net="Core1">
         <ipv4 mask="255.255.255.252">195.1.95.129</ipv4>
      </if>
      <if id="2" net="Core4">
         <ipv4 mask="255.255.255.252">195.1.95.141</ipv4>
      </if>
      <if id="3" net="centraC">
         <ipv4 mask="255.255.255.0">10.0.11.50</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RB1</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="RB2">
      <if id="1" net="Core1">
         <ipv4 mask="255.255.255.252">195.1.95.130</ipv4>
      </if>
      <if id="2" net="Core2">
         <ipv4 mask="255.255.255.252">195.1.95.133</ipv4>
      </if>
      <if id="3" net="boneA">
         <ipv4 mask="255.255.255.252">195.1.95.161</ipv4>
      </if>
      <if id="4" net="boneB">
         <ipv4 mask="255.255.255.252">195.1.95.165</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RB2</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="RB3">
      <if id="1" net="Core2">
         <ipv4 mask="255.255.255.252">195.1.95.134</ipv4>
      </if>
      <if id="2" net="Core3">
         <ipv4 mask="255.255.255.252">195.1.95.137</ipv4>
      </if>
      <if id="3" net="boneC">
         <ipv4 mask="255.255.255.252">195.1.95.169</ipv4>
      </if>
      <if id="4" net="boneD">
         <ipv4 mask="255.255.255.252">195.1.95.173</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RB3</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="RB4">
      <if id="1" net="Core3">
         <ipv4 mask="255.255.255.252">195.1.95.138</ipv4>
      </if>
      <if id="2" net="Core4">
         <ipv4 mask="255.255.255.252">195.1.95.142</ipv4>
      </if>
      <if id="3" net="boneE">
         <ipv4 mask="255.255.255.252">195.1.95.177</ipv4>
      </if>
      <if id="4" net="boneF">
         <ipv4 mask="255.255.255.252">195.1.95.181</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RB4</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>

   
   <vm name="RRA1">
      <if id="1" net="boneA">
         <ipv4 mask="255.255.255.252">195.1.95.162</ipv4>
      </if>
      <if id="2" net="sedeA">
         <ipv4 mask="255.255.255.192">195.1.84.1</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRA1</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="RRA2">
      <if id="1" net="sedeA">
         <ipv4 mask="255.255.255.192">195.1.84.2</ipv4>
      </if>
      <if id="2" net="linkA01">
         <ipv4 mask="255.255.255.252">195.1.95.193</ipv4>
      </if>
      <if id="3" net="linkA02">
         <ipv4 mask="255.255.255.252">195.1.95.197</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRA2</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="SRA">
      <if id="1" net="sedeA">
         <ipv4 mask="255.255.255.192">195.1.84.3</ipv4>
      </if>
      <route type="ipv4" gw="195.1.84.1">default</route>
   </vm>

   
   <vm name="rout01">
      <if id="1" net="linkA01">
         <ipv4 mask="255.255.255.252">195.1.95.194</ipv4>
      </if>
      <if id="2" net="suc01">
         <ipv4 mask="255.255.255.192">195.1.85.1</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout01</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="PC01">
      <if id="1" net="suc01">
         <ipv4 mask="255.255.255.192">195.1.85.2</ipv4>
      </if>
      <route type="ipv4" gw="195.1.85.1">default</route>
   </vm>

   
   <vm name="rout02">
      <if id="1" net="linkA02">
         <ipv4 mask="255.255.255.252">195.1.95.198</ipv4>
      </if>
      <if id="2" net="suc02">
         <ipv4 mask="255.255.255.192">195.1.85.65</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout02</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="PC02">
      <if id="1" net="suc02">
         <ipv4 mask="255.255.255.192">195.1.85.66</ipv4>
      </if>
      <route type="ipv4" gw="195.1.85.65">default</route>
   </vm>

   
  <vm name="RRB1">
     <if id="1" net="boneB">
        <ipv4 mask="255.255.255.252">195.1.95.166</ipv4>
     </if>
     <if id="2" net="sedeB">
        <ipv4 mask="255.255.255.192">195.1.86.1</ipv4>
     </if>
     <forwarding type="ip"/>
     <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRB1</filetree>
     <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
     <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
     <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
     <exec seq="stop" type="verbatim">killall zebra</exec>
     <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="RRB2">
      <if id="1" net="sedeB">
         <ipv4 mask="255.255.255.192">195.1.86.2</ipv4>
       </if>
       <if id="2" net="linkB03">
         <ipv4 mask="255.255.255.252">195.1.95.201</ipv4>
       </if>
      <if id="3" net="linkB04">
         <ipv4 mask="255.255.255.252">195.1.95.205</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRB2</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="SRB">
      <if id="1" net="sedeB">
         <ipv4 mask="255.255.255.192">195.1.86.3</ipv4>
      </if>
      <route type="ipv4" gw="195.1.86.1">default</route>
   </vm>


  <vm name="rout03"> 
     <if id="1" net="linkB03">
        <ipv4 mask="255.255.255.252">195.1.95.202</ipv4>
     </if>
     <if id="2" net="suc03">
        <ipv4 mask="255.255.255.192">195.1.87.1</ipv4>
     </if>
     <forwarding type="ip"/>
     <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout03</filetree>
     <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
     <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
     <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
     <exec seq="stop" type="verbatim">killall zebra</exec>
     <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="PC03">
      <if id="1" net="suc03">
         <ipv4 mask="255.255.255.192">195.1.87.2</ipv4>
      </if>
      <route type="ipv4" gw="195.1.87.1">default</route>
   </vm>
   
   
   <vm name="rout04"> 
      <if id="1" net="linkB04">
         <ipv4 mask="255.255.255.252">195.1.95.206</ipv4>
      </if>
      <if id="2" net="suc04">
         <ipv4 mask="255.255.255.192">195.1.87.65</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout04</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec  seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="PC04">
      <if id="1" net="suc04">
         <ipv4 mask="255.255.255.192">195.1.87.66</ipv4>
      </if>
      <route type="ipv4" gw="195.1.87.65">default</route>
   </vm>


   <vm name="RRC1">
      <if id="1" net="boneC">
         <ipv4 mask="255.255.255.252">195.1.95.170</ipv4>
      </if>
      <if id="2" net="sedeC">
         <ipv4 mask="255.255.255.192">195.1.88.1</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRC1</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="RRC2">
      <if id="1" net="sedeC">
         <ipv4 mask="255.255.255.192">195.1.88.2</ipv4>
      </if>
      <if id="2" net="linkC05">
         <ipv4 mask="255.255.255.252">195.1.95.209</ipv4>
      </if>
      <if id="3" net="linkC06">
         <ipv4 mask="255.255.255.252">195.1.95.213</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRC2</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="SRC">
      <if id="1" net="sedeC">
         <ipv4 mask="255.255.255.192">195.1.88.3</ipv4>
      </if>
      <route type="ipv4" gw="195.1.88.1">default</route>
   </vm>

   
   <vm name="rout05">
      <if id="1" net="linkC05">
         <ipv4 mask="255.255.255.252">195.1.95.210</ipv4>
      </if>
      <if id="2" net="suc05">
         <ipv4 mask="255.255.255.192">195.1.89.1</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout05</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="PC05">  
      <if id="1" net="suc05">
         <ipv4 mask="255.255.255.192">195.1.89.2</ipv4>
      </if>
      <route type="ipv4" gw="195.1.89.1">default</route>
   </vm>

   
   <vm name="rout06">
      <if id="1" net="linkC06">
         <ipv4 mask="255.255.255.252">195.1.95.214</ipv4>
      </if>
      <if id="2" net="suc06">
         <ipv4 mask="255.255.255.192">195.1.89.65</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout06</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="PC06">  
      <if id="1" net="suc06">
         <ipv4 mask="255.255.255.192">195.1.89.66</ipv4>
      </if>
      <route type="ipv4" gw="195.1.89.65">default</route>
   </vm>

   
   <vm name="RRD1">
      <if id="1" net="boneD">
         <ipv4 mask="255.255.255.252">195.1.95.174</ipv4>
      </if>
      <if id="2" net="sedeD">
         <ipv4 mask="255.255.255.192">195.1.90.1</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRD1</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="RRD2">
      <if id="1" net="sedeD">
         <ipv4 mask="255.255.255.192">195.1.90.2</ipv4>
      </if>
      <if id="2" net="linkD07">
         <ipv4 mask="255.255.255.252">195.1.95.217</ipv4>
      </if>
      <if id="3" net="linkD08">
         <ipv4 mask="255.255.255.252">195.1.95.221</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRD2</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="SRD">   
      <if id="1" net="sedeD">
         <ipv4 mask="255.255.255.192">195.1.90.3</ipv4>
      </if>
      <route type="ipv4" gw="195.1.90.1">default</route>
   </vm>

   
   <vm name="rout07">  
      <if id="1" net="linkD07">
         <ipv4 mask="255.255.255.252">195.1.95.218</ipv4>
      </if>
      <if id="2" net="suc07">
         <ipv4 mask="255.255.255.192">195.1.91.1</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout07</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="PC07">
      <if id="1" net="suc07">
         <ipv4 mask="255.255.255.192">195.1.91.2</ipv4>
      </if>
      <route type="ipv4" gw="195.1.91.1">default</route>
   </vm>
   
  
   <vm name="rout08">
      <if id="1" net="linkD08">
         <ipv4 mask="255.255.255.252">195.1.95.222</ipv4>
      </if>
      <if id="2" net="suc08">
         <ipv4 mask="255.255.255.192">195.1.91.65</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout08</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="PC08">
      <if id="1" net="suc08">
         <ipv4 mask="255.255.255.192">195.1.91.66</ipv4>
      </if>
      <route type="ipv4" gw="195.1.91.65">default</route>
   </vm>
   

   <vm name="RRE1">
      <if id="1" net="boneE">
         <ipv4 mask="255.255.255.252">195.1.95.178</ipv4>
      </if>
      <if id="2" net="sedeE">
         <ipv4 mask="255.255.255.192">195.1.92.1</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRE1</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="RRE2">  
      <if id="1" net="sedeE">
         <ipv4 mask="255.255.255.192">195.1.92.2</ipv4>
       </if>
       <if id="2" net="linkE09">
          <ipv4 mask="255.255.255.252">195.1.95.225</ipv4>
       </if>
       <if id="3" net="linkE10">
          <ipv4 mask="255.255.255.252">195.1.95.229</ipv4>
       </if>
       <forwarding type="ip"/>
       <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRE2</filetree>
       <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
       <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
       <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
       <exec seq="stop" type="verbatim">killall zebra</exec>
       <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="SRE">  
       <if id="1" net="sedeE">
          <ipv4 mask="255.255.255.192">195.1.92.3</ipv4>
       </if>
       <route type="ipv4" gw="195.1.92.1">default</route>
   </vm>

   
   <vm name="rout09">
      <if id="1" net="linkE09">
         <ipv4 mask="255.255.255.252">195.1.95.226</ipv4>
      </if>
      <if id="2" net="suc09">
         <ipv4 mask="255.255.255.192">195.1.93.1</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout09</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="PC09">
      <if id="1" net="suc09">
         <ipv4 mask="255.255.255.192">195.1.93.2</ipv4>
      </if>
      <route type="ipv4" gw="195.1.93.1">default</route>
   </vm>

   
   <vm name="rout10">
      <if id="1" net="linkE10">
         <ipv4 mask="255.255.255.252">195.1.95.230</ipv4>
      </if>
      <if id="2" net="suc10">
         <ipv4 mask="255.255.255.192">195.1.93.65</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout10</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="PC10">
      <if id="1" net="suc10">
         <ipv4 mask="255.255.255.192">195.1.93.66</ipv4>
      </if>
      <route type="ipv4" gw="195.1.93.65">default</route>
   </vm>


   <vm name="RRF1">
      <if id="1" net="boneF">
         <ipv4 mask="255.255.255.252">195.1.95.182</ipv4>
      </if>
      <if id="2" net="sedeF">
         <ipv4 mask="255.255.255.192">195.1.94.1</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRF1</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="RRF2">
      <if id="1" net="sedeF">
         <ipv4 mask="255.255.255.192">195.1.94.2</ipv4>
      </if>
      <if id="2" net="linkF11">
         <ipv4 mask="255.255.255.252">195.1.95.233</ipv4>
      </if>
      <if id="3" net="linkF12">
         <ipv4 mask="255.255.255.252">195.1.95.237</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRF2</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="SRF"> 
      <if id="1" net="sedeF">
         <ipv4 mask="255.255.255.192">195.1.94.3</ipv4>
      </if>
      <route type="ipv4" gw="195.1.94.1">default</route>
   </vm>

   
   <vm name="rout11">
      <if id="1" net="linkF11">
         <ipv4 mask="255.255.255.252">195.1.95.234</ipv4>
      </if>
      <if id="2" net="suc11">
         <ipv4 mask="255.255.255.192">195.1.95.1</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout11</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
   
   <vm name="PC11">
      <if id="1" net="suc11">
         <ipv4 mask="255.255.255.192">195.1.95.2</ipv4>
      </if>
      <route type="ipv4" gw="195.1.95.1">default</route>
   </vm>

     
   <vm name="rout12">
      <if id="1" net="linkF12">
         <ipv4 mask="255.255.255.252">195.1.95.238</ipv4>
      </if>
      <if id="2" net="suc12">
         <ipv4 mask="255.255.255.192">195.1.95.65</ipv4>
      </if>
      <forwarding type="ip"/>
      <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout12</filetree>
      <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
      <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
      <exec seq="stop" type="verbatim">killall zebra</exec>
      <exec seq="stop" type="verbatim">killall ospfd</exec>
   </vm>
      
   <vm name="PC12">  
      <if id="1" net="suc12">
         <ipv4 mask="255.255.255.192">195.1.95.66</ipv4>
      </if>
      <route type="ipv4" gw="195.1.95.65">default</route>
   </vm>


   <vm name="RC1"> 
      <if id="1" net="centraC">
         <ipv4 mask="255.255.255.0">10.0.11.1</ipv4>
      </if>
      <if id="2" net="centra1">
         <ipv4 mask="255.255.255.240">10.0.12.1</ipv4>
      </if>
      <route type="ipv4" gw="10.0.11.50">default</route>
   </vm>
   
   <vm name="RC2">  
      <if id="1" net="centraC">
         <ipv4 mask="255.255.255.0">10.0.11.2</ipv4>
      </if>
      <if id="2" net="centra2">
         <ipv4 mask="255.255.255.240">10.0.12.17</ipv4>
      </if>
      <route type="ipv4" gw="10.0.11.50">default</route>
   </vm>
   
   <vm name="RC3">
      <if id="1" net="centraC">
         <ipv4 mask="255.255.255.0">10.0.11.3</ipv4>
      </if>
      <if id="2" net="centra3">
         <ipv4 mask="255.255.255.240">10.0.32.1</ipv4>
      </if>
      <route type="ipv4" gw="10.0.11.50">default</route>
   </vm>
   
   <vm name="RC4">   
      <if id="1" net="centraC">
         <ipv4 mask="255.255.255.0">10.0.11.4</ipv4>
      </if>
      <if id="2" net="centra3">
         <ipv4 mask="255.255.255.240">10.0.12.49</ipv4>
      </if>
      <route type="ipv4" gw="10.0.11.50">default</route>
   </vm>
   
   <vm name="SC"> 
      <if id="1" net="centraC">
         <ipv4 mask="255.255.255.0">10.0.11.22</ipv4>
      </if>
      <route type="ipv4" gw="10.0.11.50">default</route>
   </vm>
   
</vnuml>

</pre>

Old Releases